OMPHOBBY OMP Heli M1 EVO yellow with Transmitter # OSHM0035

In stock
OMPHOBBY OMP Heli M1 EVO yellow with Transmitter # OSHM0035
€339.00
Item number: OSHM0035

OMP Hobby M1 EVO in RTF SET with Transmitter Radiomaster Pocket

The ideal introduction to the world of model helicopters.

The ingenious flight characteristics and good nature of the heli together with the appropriate, easy-to-use transmitter.

If beginner, advanced or professional the RTF set for every pilot or those who want to become one.

 

Specifications

* 3 flight phases with different speeds (1st flight phase with motor off with stick down / 2 - 3 motors permanently on for 3D)
* Optionally switch 3D normal flight / horizontal stabilization (can also be used as a rescue)
* Control behavior (DR) adjustable in the transmitter
* Motor off switch
* The helicopter's flight controller can also be used to adjust the response and agility to your own needs
* All settings can be made directly on the model without a PC or mobile phone
* The Canopy can be removed without tools, making adjustments and repairs easier
* Stable storage and transport box for the heli

 

We will tie up the helicopter and transmitter for you and test fly them.

After inserting the transmitter batteries and charging the flight battery, the set is ready for use.

 

Description Transmitter:

The RadioMaster Pocket is a small and light transmitter with great performance. It comes with the multiprotocol CC2500, and with the EdgeTX firmware. The helicopter is already programmed on the transmitter. The Pocket is also equipped with removable sticks and a foldable antenna, making it easy to transport and store. The required 18650 batteries are included in the scope of delivery.

 

Description Helicopter OMP M1 EVO

The OMP M1 EVO now comes with a new look and an aluminum carbon main frame.

 

  • OMP M1 EVO is a high-quality product developed by OMPHOBBY for helicopter enthusiasts. Its compact size makes it flexible for either indoor flight or outdoor violent flight.
  • High performance direct drive 3D helicopter with dual Brushless motors.
  • Dimensions: 290mm* 88mm *290mm (11.4inch*6.46inch*11.4inch)
  • Flying weight: Approx.118g
  • The dual ESC 's are improved using high-quality MOSFET' s with lower internal resistance, enhancing the flight characteristics even further. The built-in official receiver supports S-BUS and DSM/ DSMX satellites.
  • The flight controller built-in flight modes: stabilizing attitude and 3d.
  • While in 3D mode you can quickly switch to attitude mode. The flight controller also has fully adjustable parameters including gyro sensitivity, rates, gain and servo mid-point position / collective.
  • Six Core Advantages
  • Adjustable Flight Controller Parameters
  • Dual Brushless Direct Drive
  • High-performance 3D Flight
  • High Precision
  • low Noise
  • Easily Maintained

Content:

  • OMPHOBBY M1 EVO Heli
  • Stable transport box
  • Replacement servo arms
  • Screwdriver 1mm hexagon
  • Swashplate Leveler
  • Wrench
  • 1x LiPo Battery 2s 350mAh
  • Charging cable XT60
  • transmitter Radiomaster Pocket (MODE 2)
  • transmitter battery 18650
  • Manual

Still needed:

  • Handy charging cable (for transmitter)
  • LiPo Charger